Skip to main content

भारतीय रसायन के पिता आचार्य प्रफुल्ल चंद्र रे की जयंती पर व्याख्यान का आयोजन

भारतीय रसायन के पिता आचार्य प्रफुल्ल चंद्र रे की जयंती पर व्याख्यान का आयोजन विज्ञान भारती उदयपुर इकाई एवं बीएन कॉलेज ऑफ फार्मेसी, बीएन विश्वविद्यालय के संयुक्त तत्वावधान में कार्यक्रम सम्पन्न उदयपुर, 2 अगस्त। भारतीय रसायन के पिता आचार्य प्रफुल्ल चंद्र रे की जयंती के अवसर पर विज्ञान भारती उदयपुर इकाई (चित्तौड़ प्रांत) एवं बीएन कॉलेज ऑफ फार्मेसी, बीएन विश्वविद्यालय के संयुक्त तत्वावधान में एक विशेष व्याख्यान का आयोजन किया गया। कार्यक्रम का उद्देश्य आचार्य पी.सी. रे के वैज्ञानिक योगदान एवं उनके देशभक्ति से ओतप्रोत जीवन पर प्रकाश डालना था। ज्ञातव्य है कि भारत की पहली फार्मा कंपनी आचार्य रे ने ही बंगाल केमिकल एंड फार्मास्यूटिकल्स लिमिटेड, कोलकाता में 1901 में प्रारंभ की थी। कार्यक्रम में विज्ञान भारती के उद्देश्य एवं गतिविधियों की जानकारी डॉ. अमित गुप्ता द्वारा दी गई। आचार्य पी.सी. रे के जीवन और कार्यों पर मुख्य व्याख्यान डॉ. लोकेश अग्रवाल द्वारा प्रस्तुत किया गया। उन्होंने बताया कि कैसे आचार्य रे ने विज्ञान को समाज की सेवा का माध्यम बनाया और रसायन विज्ञान में भारत को आत्मनिर्भर बनान...

Introduction of quantum mechanics | Quantum mechanics | Physical basis of quantum mechanics

Introduction of quantum mechanics

  • Newton’s law of mechanics are based on the elementary idea of physics or classical mechanics.
  • This mechanics is applicable only on macroscopic particles.
  • The basic principle used in classical mechanics are Lagrange’s equations, Hamilton’s equations.
  • Classical physics also contain electromagnetism, thermodynamics and statistical mechanics.
  • Interference, diffraction and polarization of light can be explained by wave nature of light.
  • Photoelectric effect, Compton effect etc. can not be explained by wave theory.
  • These phenomenon can be explained by Quantum mechanics.
  • Black body Radiation

  • An object which completely absorbs the radiations falling on it, whatever be the wavelength, is known as black body.
  • No body absorbs 100% radiations falling on it.
  • Lamp black, carbon black, platinum black absorbs 90-95% radiations falling on them, so they can be considered as a black body.
  • If a black body be placed in an isothermal enclosure then the body will emit the full radiation of the enclosure after it is in thermal equilibrium with the enclosure.
  • The heat radiations in an isothermal enclosure are black body radiations.
  • Since these radiations are coming from a cavity and hence they are also known as cavity radiations.
  • Conclusions of black body Radiation

  • The energy is not uniformly distributed.
  • The total energy emitted by a black body increases rapidly with T.
  • At a given temperature, the intensity of radiation increases with increase in wavelength and become maximum at a particular wavelength and again start to decrease.
  • The wavelength corresponding to maximum energy decreases with absolute temperature.
  • The energy distribution curve of black body radiation is shown below.

        Stefan’s Law

  • The rate of emission of radiant energy by unit area of a perfectly black body is directly  proportional to the fourth power of its absolute temperature.
  • E ∝ T4             or        E = σT4 
  • Here σ = Stefan's constant and σ = 5.672*10--8 W/m2 K4
  • Wien’s Displacement Law

  • The product of the wavelength corresponding to the maximum energy and the absolute temperature is always remain constant.
  • lm ∝ 1/T   or    lmT = b
  • Here b = Wien's constant and its value is 2.88*10--3 mK
  • Limitations of classical theory

  • Wien’s formula agree with experimental value at shorter wavelength, and didn’t fit well at higher wavelengths.
  • Rayleigh-Jeans law was found to agree with experimental curve at longer wavelengths and fails at shorter wavelengths.
  • Planck’s quantum theory

  • An oscillator can have only discrete energies, not continuous.
  • During transition from one energy level to another, an electron can absorb or emit radiation in the form of quanta or photon.
  • On the basis of it Planck gave a formula known as Planck's radiation formula, which fit well at all the range of wavelength. At shorter wavelengths it converts into Wein's law and at higher wavelength it follow the Rayleigh-Jeans law.
To know more about this content visit on https://youtu.be/ux7sQ9aS9VA

Comments

Post a Comment

Popular posts from this blog

Constraints | Classification and Properties of constraints | Classical mechanics

Constraints and its classification Constraints force Constraints are restrictions that limit the motion of the particles of a system. Physically constrained motion is realized by the forces which arise when the object in motion is in contact with the constraining surfaces or curves. These forces are called constraint forces. Properties of constraints force They are elastic in nature and appear at the surface of contact. They are so strong that they barely allow the body under consideration to deviate even slightly from a prescribed path or surface. This prescribed path or surface is called a constraint. The effect of constraint force is to keep the constraint relations satisfied. Classification of constraints           Scleronomic and Rheonomic This classification is based on time. The constraints are said to be scleronomic constraints, if the constraint relations do not explicitly depend on time. But if the constraint rela...

MCT | MOS- controlled thyristor | Power electronics

MOS Controlled thyristor (MCT) It is basically a thyristor with two MOSFETs built into the gate structure. One MOSFET is used for turning on the MCT and the other for turning off the device. MCT is a high frequency, high power, low-conducting drop switching device. A practical MCT consists of thousands of these basic cells connected in parallel just like a power MOSFET. This is done to achieve a high current carrying capacity of the device. Basic structure of MCT The equivalent circuit of MCT consists of one on-FET, one off-FET and two transistors. The on-FET is a p-channel MOSFET and off-FET is an n-channel MOSFET. An arrow towards the gate terminal indicates n-channel MOSFET and the arrow away form the gate terminal is the p-channel MOSFET. The two transistor in the equivalent circuit represents that there is regenerative feedback in the MCT just same as in an ordinary thyristor. (a) Equivalent circuit of MCT and (b) Circuit symbol of ...

Cardinal points of a lens system | Optics | General theory of image formation

Cardinal points of a lens system There are total six cardinal points of a lens system, which are first and second focal points, first and second principal points, and first and second nodal points. First and second focal points (First and second focal planes) A pair of points lying on the principal axis and conjugate to points at infinity are known as focal points. First and Second focal points A point on the principal axis in the object space so that the rays starting (or appear to start) from it become parallel to the principal axis after refraction from the lens system is known as first focal point (F 1 ). A point on the principal axis in the image space so that the rays parallel to the principal axis in the image space focus (or appear to focus) at this point after refraction from the lens system is known as second focal point (F 2 ). First and Second focal planes The plane passing through the first focal point, and perpendicular to the optic axis is first f...