Skip to main content

खनन और खनिज उद्योगों में पर्यावरणीय स्थिरता विषय पर विशेषज्ञों का मंथन

खनन और खनिज उद्योगों में पर्यावरणीय स्थिरता  विषय पर विशेषज्ञों का मंथन पर्यावरणीय स्थिरता मानव समाज के निरन्तर अस्तित्व, समृद्धि और स्वास्थ्य के लिए मूलभूत शर्त है। हमारी न्यू जनरेशन को स्पीड और टेक्नोलॉजी पर ध्यान केंद्रित करना होगा ताकि भविष्य को सुनहरा बनाया जा सके। उक्त विचार मुख्य अतिथि श्री एमपी सिंह, प्रधान मुख्य अभियंता, केंद्रीय विद्युत प्राधिकरण विद्युत मंत्रालय भारत सरकार, नई दिल्ली ने व्यक्त किए श्री सिंह भूपाल नोबल्स स्नातकोत्तर महाविद्यालय में भूविज्ञान विभाग द्वारा "खनन और खनिज उद्योगों में पर्यावरणीय स्थिरता" विषय पर आयोजित दो दिवसीय राष्ट्रीय कॉन्फ्रेंस के समापन पर बोल रहे थे। दो दिवसीय राष्ट्रीय कान्फ्रेंस का भव्य समापन सम्मानित अतिथि प्रो विनोद अग्रवाल सदस्य, भारत सरकार नई दिल्ली स्थित MOEFCC की विशेषज्ञ मूल्यांकन समिति, (सि एण्ड टीपी) अपने उद्बोधन में कहा कि पर्यावरण स्थिरता सरकार और समाज दोनों की जिम्मेदारी है। वर्तमान में खनन उद्योग विभिन्न प्रावधानों एवं कानूनों के तहत कार्य कर रहा है ताकि पर्यावरण को सुरक्षित रखा जा सके। आयोजन सचिव डॉ. हेमंत सेन न...

Gas laws on the basis of kinetic theory


  • It is found that the gas laws like Boyle’s law, Charles’ law, Gay Lussac’s law, Avogadro’s law, Dalton’s law of partial pressure, Graham’s law of diffusion can be derived on the basis of kinetic theory. So here in Gas laws on the basis of kinetic theory, we derived and explain all these laws. Since in the lecture Gas laws on the basis of kinetic theory we explain and derive all the above laws on the basis of kinetic theory, it means kinetic theory plays a major role in thermodynamics or thermal physics. All the laws here are explained both in Hindi and English language, so it is better to understand the student of Hindi and English mediums. This is a bilingual lecture. This topic is related to Thermodynamics or thermal physics.

Comments

Popular posts from this blog

Electric field due to circular loop of charge | Electromagnetics

Electric field due to circular loop of charge Electric field The space around a charged particle in which another charge experience a force is known as electric field. The source of electric field is either a charge or a time varying magnetic field. If the value of electric field does not change with time, then it will be uniform electric field, otherwise it will be non-uniform electric field. Electric field due to circular loop of charge If λ is linear charge density, then the charge on d l dq = λ d l      ⇒     dq = (q / 2πa) d l Electric field at P due to charge dq Special cases When P lies at the centre of the loop i. e., r = 0, then E = 0 When P lies very far from the centre of the loop i. e., r >> a, then E = kq / r 2 In this case circular loop behaves as a point charge. To know more about this topic please click on the link  https://youtu.be/54MIe0Ow43w   or...

Thomson’s parabola method | EMFT and Relativity | Motion of charged particles in E and B fields

Thomson’s parabola method Positive ray analysis This method is used to find the charge to mass ratio. Thomson parabola method T = Discharge tube, the pressure of gas in this tube is kept 0.01 mm of Hg E = Capillary tube C = Cathode, which is perforated with an extremely small holes W = Water jacket, used to cool the cathode A and B = Metallic plates, the electric field is applied between these plates N and S = North and south poles of a heavy magnet K = Highly evacuated camera P = Photographic plate R = Liquid air trap, used to keep the pressure in K quite low Working To ensure the supply of the gas, a steady steam of the gas is allowed to pass through E and after circulating the tube, it is escaped through M. The positive ion produced in T move towards C. The ion which reaches C axially. pass through its fine hole in the form of narrow beam. After crossing C, the parallel beam of ions enters into the electric and magnetic...

Conservation laws

Conservation laws Conservation of linear momentum Conservation of angular momentum Conservation of energy Conservation of linear momentum In the absence of external force (F), the total linear momentum of the system (p) always remain constant. It means if F = 0, then p = constant Conservation of angular momentum In the absence of external torque (), the total angular momentum of the system (L) always remain constant. It means if torque = 0, then L = constant Conservation of energy Energy can neither be created, nor be destroyed, it can only be convert from one form to another, it means the total energy of an isolated system always remains constant.